This is a tactil electronique Dimmer it you allow to vary the power of your edits using the buttons present on the housing 12V and a 8A maximum. You can find the button on / off increase and decrease
This Dimmer mono channel will allow to vary the power of your fixtures 12V for maximum 8A all in a perfect melt. Once the power minimum, this position serves as the off button.
This is a single wire without Dimmer channel, you allow to vary the power of your fixtures 12V for maximum 8A all in a perfect melt through the remote control supplied with the battery.
This 3 channel RGB Dimmer will allow to vary the power of your fixtures 12V for up to 4A per channel all in a perfect melt. Once the power at a minimum, this position serves off button.
This wireless multizone dimmer allows to vary the power for maximum 12A. You will be able to handle several controllers at the same time with one remote or 4 controllers separately with still one remote or even use several remotes for one
This is a mini RGB controller, you will supply your strip led waterproof RGB plug & play or any RGB strip connected by wire to the existing connector. It must be connected to a 40 or 60W power site.
This is a 5V RGB controller, you will supply our LED RGB channels.
This RGB controller will allow to connect your flexible strip RGB LED and operate blending modes between Colors already existing. It must be connected to a power supply 60 or 100w
This RGB+W controller will feed your RGBW led strips to use the fading modes with the already existing colors. The touch-screen remote control also allows to choose the desired color. It must be connected to a 60 or 100W power supply. A specific button switches the white led of the strip on.
Controller touch RGBW remote control RF (Radio Frequency). It has a simple design and modern, remote controller high frequency 2.4 G, a maximum load per channel 6A, a strong resistance to interference and the distance can go up to 30 meters. The functions of color changing and brightness adjustment are simple and practical.Dimensions: Receiver (85x45x22...
LED controller with ON/OFF functionality at a distance.
This is a Bi-Color Controller, you will supply your band Bi-Color LED and operate the blend mode between the two Colors and the light intensity at a distance with the wireless remote RF wire.
Touch controller RGB with RF remote control (Radio Frequency). It has a simple design and modern, remote controller high frequency 2.4 G, a maximum load 12A, a high resistance to interference and the distance can go up to 30 meters. The functions of color changing and brightness adjustment are simple and practical.
Controller for LED Ribbon RGB LED 220V AC, with IR remote control (ir signal) 24 keys with which you can control the RGB channels in a manner effective up to 10 meter of distance. With this controller, you can choose the color and the desired effect, it is also possible to adjust the intensity and speed of the transitions.
Controller LED Ribbons, RGB AC 220V with IR Remote controller 28 Buttons with which you can remotely manage the RGB channels effectively thanks to its output 4A per channel . With this controller, you can choose the color and the desired effect as well as the intensity and the speed of the transitions.
Controller designed for LED ribbons, RGB fed to AC 220V with RF remote (Radio Frequency) for 28 keys and 6 meters of distance with which you can remotely manage the RGB channels effectively thanks to its output 2A per channel . With this controller, you can choose the color and the desired effect as well as the intensity and the speed of the transitions.
Controller designed for LED ribbons 220V-RGB with which you can manage the RGB channels in an efficient way. Each RGB controller supports up to 20 linear meters (max) LED ribbon RGB-60 leds per meter. With this controller, you can manage the effects and modes.
This is an RGB amplifier you to extend your rgb fixtures 6 meters additional. This amplifier needs to operate with a 8A 12V.
Night sensor 230V IP54 2000W
This 160 ° built-in detector is used as a switch and is placed in your rooms to turn on ceiling, lamps, or other light device with its motion detector
This 180º Surface Mounted Motion Sensor is used as a switch and is placed in your rooms to turn on ceiling, lights, or other light device with its motion detector.
This 360º Surface Mounted Motion Sensor is used as a switch and is placed in your rooms to turn on ceiling, lights, or other light device with its motion detector.
This 360 ° built-in detector can be set in your rooms to turn on ceiling, lamps, or other light device with its motion detector.
This Mini Recessed Motion sensor 140° is used as a switch and is placed in your rooms to turn on ceiling, lamps, or other light device with its motion detector
This 360° Micro Wave Motion Sensor 2-10M can be set in your rooms to turn on ceiling, lamps, or other luminous device with its motion and brightness sensor.
The E27 Adapter with Motion and light sensor allows you to control your E27 bulbs. Just place it in your ceiling light, fixture, etc. and adjust the various parameters such as the lux level, or the detection range.
Night sensor switch allows on/off switching of luminaires according to the ambient light. Supports up to 10A.
This light dimmer 0-10V connects directly on 220V and the 0-10 V output to a 0-10V compatible product. You will then be able to dim the light with the button or the remote control.
This LED dimmer type 1-10V 90-240V, enables you to control the intensity from 0 to 100% of all LED solutions accepting a variation, such as those that you will find in the accessories section.
This LED dimmer type TRIAC 85-265V AC, allows you to control the intensity of all LED solutions accepting a variation of 0% to 100%, such as those that you will find in the accessories section.
The Power supply DALI PS1 is designed to supply power Driver LED DALI or control modules without their own power supply. It consumes 4W, and its output current is 200 mA.
The Control Module DALI RM 1 Relay, allows you to control a contactor (12/24V DC or 220V AC) so that you can turn on or off different sources across the protocols DALI. The voltage regulation to a maximum of 250V alternating current (AC) and 35V dc (DC).
The PC Interface Module for USB allows you to connect a computer to the Systems DALI comfortDIM. The programmer serves as an interface between the computer and the systems DALI for Addressing, programming and setup installations DALI using the software masterCONFIGURATOR. Systems DALI comfortDIM can ma
The Dimmer Phase cut Upstream / Downstream DALI PCD 1-300 one4all, you can integrate DALI Protocol ; elements such as transformers, electronic and magnetic halogen bulbs and solo piece. It features an output phase Dimmable, and an automatic identification system of charges.
The Control Module with 4 Inputs, Freely Programmable DALI XC, allows you to connect switches or conventional push buttons to customize and program of ignitions grouped, scenes and macros using the software masterCONFIGURATOR. It also allows you to change the color temperature.
Je suis déçu des plus de trois semaines de livraison , par un livreur privé , alors que ça devait être la poste ,donc rendez vous avec le livreur, qui s'est perdu ! Panneau avec un défaut d'éclairage , qui ce traduit par une auréole, donc retour à l'envoyeur. Par contre on ne m'ennuie pas avec des preuves à fournir , on m'a fait confiance sur les défauts du produit .Cordialement
bien mais lent
commande conforme a mes attentes, bon rapport qualité prix, mais livraison très lente
ampoules de qualité
Sur les 3 références commandées, seule la plus cher n'est pas adaptée à mon véhicule, il a fallu refiler correctement les ampoules sur le support avec des vis et adapter le support d'origine du véhicule pour les ampoules. Un peu déçu de ce côté mais les les sont de bonne qualité.
Ampoules leds d'antibrouillards avant pour Grand Scénic 4
Je viens de recevoir ma commande (ampoules leds d'antibrouillards avant pour Grand Scénic 4) et je me suis empressé de les monter. Au départ, j'ai eu un peu peur car il n'y avait pas le système anti-erreur additionnel indiqué dans le descriptif du produit et je me suis dit que j'allais avoir une erreur au tableau de bord, mais finalement, après montage, aucune erreur n'est apparue. Résultat, c'est impeccable et ça change la physionomie de la face avant de mon Scénic surtout que les antibrouillards s'allument à chaque virage (en dessous de 40 km/h). La pose prends 5 minutes (sans outils) et les ampoules se montent en lieu et place des ampoules d'origine. Je suis ravi de mon achat et je recommande vivement le site planeteleds.fr.
Contact our advisors.
They will answer all your questions.
From Tuesdays to Thurdays, 10am-12pm / 2pm-6pm, on Fridays until 7pm and on Saturdays 10am-13pm
From Mondays to Fridays : 9am-12pm and 14pm-18pm
Subscribe now and enjoy exclusive offers, personalized advice and vouchers!
Let others know by giving your opinion and earn a voucher